Switch TP-LINK Desktop/pedestal 16x10Base-T / 100Base-TX / 1000Base-T TL-SG116E
Switching capacity 32 Gbps | Forwarding rate 23.81 Mpps | Switching method Store-and-forward | Included Accessories Power Cord, Installation Guide, Rubber Feet | Dimensions 286 x 111.7 x 25.4 mm | Product Net Weight 1.3 kg
Delivery by courier: €5.90
Delivery by Omniva Parcel machine:€3.90
Free shipping on all orders over €500
| Description | What This Product Does
|
| Summary | TP-Link 16-Port Gigabit Unmanaged Pro Switch. Switch type: Unmanaged, Switch layer: L2. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Basic switching RJ-45 Ethernet ports quantity: 16. Full duplex. MAC address table: 8000 entries, Switching capacity: 32 Gbit/s. Networking standards: IEEE 802.1Q, IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u |
| Vendor Homepage | https://www.tp-link.com/us/products/details/cat-5711_TL-SG116E.html |
| Category Code | SWI |
| CnCode | 85176200 |
| Unit Box Height | 0.17 |
| Unit Box Length | 0.415 |
| Unit Box Width | 0.07 |
| Quality of Service (QoS) support | Yes |
| Switch layer | L2 |
| Switch type | Unmanaged |
| Basic switching RJ-45 Ethernet ports quantity | 16 |
| Basic switching RJ-45 Ethernet ports type | Gigabit Ethernet (10/100/1000) |
| Gigabit Ethernet (copper) ports quantity | 16 |
| 10G support | No |
| Auto MDI/MDI-X | Yes |
| Auto-negotiation | Yes |
| Broadcast storm control | Yes |
| Cable length detection | Yes |
| Cable types supported | Cat3/Cat4/Cat5/Cat5e/Cat6 |
| Copper ethernet cabling technology | 1000BASE-T/100BASE-TX/10BASE-T |
| Full duplex | Yes |
| Link aggregation | Yes |
| Networking standards | IEEE 802.1p/IEEE 802.1Q/IEEE 802.3/IEEE 802.3ab/IEEE 802.3u |
| Number of VLANs | 32 |
| Port mirroring | Yes |
| Rate limiting | Yes |
| Virtual LAN features | Protocol-based VLAN/Tagged VLAN |
| VLAN support | Yes |
| Forwarding rate | 23.81 |
| Jumbo frames | 10000 |
| Jumbo frames support | Yes |
| MAC address table | 8000 |
| Number of queues | 4 |
| Packet buffer memory | 4.1 |
| Store-and-forward | Yes |







